Re: Ford 1931 Hot rod

Predicta Lun 5 Mai - 10:19

Body is real nice Henry Ford Steel. Chopped, channeled, louvered deck, filled cowl, shortened grill shell. Very nice professional black paint, vinyl top & tasteful pinstriping, not a rat or home garage job. Boxed and Z'd powdercoated frame. Chassis Engineering front axle w/ 36 ford 'bones drilled and sleeved. 3.70 ratio posi 9" Ford rearend w/ reversed springs and Pete & Jake's Ladder bar setup. Drum brakes front and rear. Traditional looking big and little steel wheels and ford caps with repop vintage bias ply tires. Wilwood pedal set, Vega steering box, Muncie 4-spd transmission mated to a 1955 - 331 Chrysler Hemi motor. Motor rebuilt by professional machine shop with new parts and is like new. triple rochester carb setup runs/starts fantastic. Open headers or blankoffs and mufflered exhaust is your choice. '32 ford dash with custom insert. 1940 ford steering wheel. functioning Stewart Warner gauges, all lights work.

Predicta Lun 5 Mai - 10:23

Predicta Lun 5 Mai - 10:25

Predicta Lun 19 Mai - 5:33

This is a one-of-a-kind, completely hand built, completely powder coated (except for numerous pieces of stainless, chrome and polished aluminum) from the ground-up hot rod, that is based on a 1931 Ford Model A Roadster. Features an all steel Brookville Roadster body that is finished with a holographic flat black powder coat.

This car has been featured on the Hot Rod Magazine Power tour, and on the cover of Powder Coating Magazine.

The frame is from Pete and Jake's with the finest chassis parts available, including a Ford 9 inch rear end with 4:11 gears, a 700R4 transmission, 4-wheel disc brakes, and a dyno-tested 400 HP 350 Chevy engine with aluminum Dart heads, gear drive and custom headers. This car is detailed to national show car standards, and is compliant with NHRA rules for drag racing up to 11.5 seconds in the quarter mile. It also meets NSRA safety standards for street use, and the car is fully titled and licensed as a '31 Ford Roadster.

Predicta Ven 27 Juin - 5:33

This is a 1931 Ford Model A Coupe that was custom built by myself. Vehicle runs and drives great with 19,000 original miles on the engine. All the best stuff on this one. Vehicle needs to have the interior trim finished.

Vehicle was built on a TCI Chassis with a 1956 Ford 9 in. big bearing rear end with a 3:50 posi unit with 11 in. brakes. The suspension has TCI coil over shocks and ladder bars. The engine is a 330 cu in. 1956 Desoto Fireflight with 1957 Desoto factory dual quad intake and Mallory electronic ignition. Also has a custom aluminum radiator,stays cool. It has a Chevrolet Turbo 400 transmission with Hot Heads adapter. Has an original 1932 grille shell, The top has a 3 1/2" chop with 4/12" channel. Custom tube floor section covered with metal. Front brakes are on a Moor Drop front axle with 1947 Ford brakes with 1957 Buick front drums.

Predicta Ven 27 Juin - 5:36

Predicta Sam 28 Juin - 8:56

1931 Ford Roadster Pick Up

Seeking a very cool Hot Rod roadster pick up built by a nationally well known builder? Well you have found it. This awesome ride was built by Russ Freund in Spokane, WA. Russ is well known in the Street and Hot Rod market. He has built some of the most recognized Street and Hot Rods the hobby has to offer not only for customers, but his own rides as well. The RPU is built right using the best in parts and equipment. The build started in 2007 and finished in 2009 with 4,400 miles since completed. The cost of the build was over 50K with labor. The truck is in like new condition show casing a traditional build. Very little ware and shows excellent. Winner of various awards this very cool truck is worthy of your consideration.

Body/Paint: The body was a new all steel Brookville with a 6 inch cab stretch. Mocked up properly for fit in order to get the best paint and finish. The paint is all PPG and is beautiful with proper wet sanding and buffing. The color is Emerald green metallic base/clear. A very good color choice for this truck. The bed is shorted as part of the body kit. Beautiful wood with green tint. Don Audel pin stripping. Painted hood included.

Interior: The interior is two tone white and green vinyl that is in excellent condition. Dolphin gauges, tach, speedo, oil pressure, temp, volt and fuel. Nice comfortable bench seat that has storage underneath as well as folds opening up the back with pockets for storage. The seat is heated with left and right controls. Stereo CD/am/fm player stored under the seat with remote control under the dash. Storage self under the dash that holds the two speakers. The top is green made with top of line Mercedes convertible top material. Snaps with frame. The top can be dismounted and taken of the truck. Does not fold down in place. No side curtains. Turn signals and brights with indicators in head lights.

Running Gear: 350 Chevrolet engine with camel hump heads completely rebuilt with approximately 350 hp. 9 to 1 compression with HD oil pump and timing chains. Mild Schneider cam. Howard Green built the engine. Offenhauser aluminum intake with Rochester tri power. TH350 rebuilt with shift kit using Lokar shifter. Rear end is a Ford 9 inch with 3.00 gears, non posi. Great for hiway cruising with good gas mileage. Alternator hidden in generator body. HEI ignition. Electric puller fan.

Predicta Sam 28 Juin - 9:01

Suspension: The entire frame and suspension is Pete and Jakes front to back with boxed frame, 4 link rear with coil overs. Front end is a Super Bell 4 inch drop with hairpins with shocks.

Bright work: All new and looks excellent.

Glass: Unchopped windshield with new glass. Rear window is glass.

Exhaust: Hand built headers with cut outs and baffles ceramic coated. 2.5 inch exhaust with Flow Masters. Sound awesome!

Brakes: Non power disc front and drum rear brakes

Wheels/Tires: 15 inch rear wheels with Radar 8.20 bias cheater slicks with two grooves. Fronts are bias 5.60 14 inch.

Predicta Sam 5 Juil - 6:06

1931 Ford Model A sedan.

Engine: Buick 215 V8. This is the all aluminum engine that came out of 1962 Buick special. The engine was completely rebuilt. Bored .30 over. New pistons. New bearings. New gaskets. Crower performance camshaft and lifters. Rebuilt heads. ARP head bolts. New valve springs. New timing chain. New water pump. Electric fan. New alternator. New mini starter. New fuel pump. Dual 2 barrel carbs with velocity stacks. 11 gallon gas tank. Lake headers. Offenhauser valve covers. 11 gallon gas tank.

Drive train: GM th200 automatic transmission. Completely rebuilt with shift kit. B&M hole shot torque converter. Lokar shifter. Ford 9 rear end with 3.55 gears. Rear suspension is 4 link with coil over shocks. Front end is 1946 ford split wishbone. All new brake shoes, wheel cylinders, hardware and lines. Wilwood dual master cylinder. Reversed Corvair steering box

Body and frame: Body is 1931 tudor sedan. Body is chopped and channeled. Complete body was sand blasted and epoxy primed and then painted flat blue. Firewall was painted white.There is small rust holes on bottom of cowl and rear wheel well areas. Top is white canvas. Framed is custom built 2x3 and z’d 14" in the rear. All windows have glass. Front and rear side windows roll up and down. Front windshield tilts out. (right rear window has a crack in it) 1950 Pontiac taillights. Guide 682-c headlights. Mr. Roadster 20 circuit wire harness. All new window and door seals.

Interior: Aluminum bomber seats with custom upholstery. Lap seat belts. Auto meter gauges. Tachometer. 3 spoke steering wheel. Speedway steering column. Small heater on passenger side firewall that works great.

Tires: Firestone bias white walls. Front are 5.60 15. Rear are 7.10 15. Ford 5x5.5 rims with bullet center caps and bullet lug nuts. Trim rings. This car was built 3 years ago.

Predicta Sam 5 Juil - 6:08

Predicta Ven 25 Juil - 4:23

1931 Ford Model A Roadster Pick Up
1932 Model B Engine with a Roof 101 Overhead Valve Conversion
4 Speed Ford Overdrive Transmission
Quick Change Rear
Juice- Hydraulic Brakes
This was in Street Rodder and Good Guys has won at Lake George as well !!!

Predicta Ven 1 Aoû - 5:19

http://www.vonskip.com/2010/11/stans-1931-roadster.html

Predicta Mar 9 Sep - 6:26

Vintage 1931 Ford Model A chopped Coupe. Built 302 motor, c4 automatic, 9" rear, Real 1932 Ford frame, 1932 original grill shell!!
This car Runs/Drives Excellent. It is a true "Hot Rod" with many vintage parts and has been a hot rod for many many years.
This is a period correct real car, no fiberglass or replica BS here. We drive it Daily!!

No hesitations, No taps, No smoke, you can drive this car at 80mph with one hand... and we do.

New steelies, Radial tires, Chrome drop axle, Front disc brakes, mustang steering box with cross steer, rear adjustable coilovers, pontiac tail lights, Lokar shifter, Lake headers, glass trunk deck, painless wiring, ididit ss steering tilt column, 1946 Ford Dash. 4" chop Top. Speedo works as well as the other gauges. Turn Key Hot rod. Built to drive anywhere. Roof has a white snap on top made from marine vinyl with thick rubber gasket, brand new. Electric trunk solenoid. Car come with a new round chrome air filter.

Predicta Mar 9 Sep - 6:30

Predicta Mar 23 Sep - 5:26

1929 Ford Model A tudor sedan. Recently completed and ready to drive. Just over 2000 miles on car. The body is an all steel original tudor sedan, chopped 4 inches, roof filled, steel floor, and all wood removed and replaced with steel. It sits on a one off frame made for this car. Frame is 2x3 square tube kicked up in front and back. reinforced throughout. Rear end is a GM 10 bolt with 4 link and panhard bar, and coilover shocks. Front end is all new super bell 4 inch drop I beam axle with hairpins, all new kingpins and hardware throughout. Engine is a 305 Small block chevy with a holley 650 carb, and a fresh 700r4 transmission. Car runs a drives nice. New dual master cylinder under floor, all new brake lines and hardware. All new glass, windshield still moves out to get fresh air in down the highway. All new gauges and wiring harness. Speedway steering column with metal flake wheel. Interior is finished out with matching red and pearl white tuck and roll. Gas tank is located under rear frame kickup. Halogen headlight conversion inside 40's Cadillac headlight buckets. Rear taillights are 39 Chevy. New wheel vintique smoothie rims and baby moon hub caps with new BFG Silvertown radial wide white tires. Frame is painted body color and suspension components are cream to match wheels and firewall.

Predicta Mar 23 Sep - 5:27

Predicta Mer 24 Sep - 7:33

1931 Ford Model A roadster, "Blue Dream" built by Mark Whitney Mehran from Hot Rod Surf in San Diego, CA. This is a read deal, Henry Ford steel car with lots of desirable vintage parts including, but not limited to:

1959 283 Chevy V8 with Offenhauser tri carb setup
1969 aluminum case Powerglide transmission
Offenhauser finned aluminum valve covers
Moon fuel tank
Moon gauges
Moon fuel distribution block and fuel pressure gauge
King Bee headlights
Walker radiator
32 grille shell
SO-Cal/Buick vented front disc brakes
Coker wide whites
Real 31 California Black Plates!
Ford 9" rear end
Hot Rod Surf Duvall style windshield
Boxed Model A rails